how to reduce maximum demand in electricity

Solar Panel Texas

How to reduce maximum demand in electricity consumption?

Aren’t electricity bills just annoying? The cost of your consumption might not seem excessive however, peak demand charges can really hurt you. These fees are for the maximum amount of energy you use in the span of 15 minutes in the month.

The charges for peak demand aren’t based on the energy you use. The excessive use of energy is typically the cause of the charge for peak demand.

They are often the largest part of utility bills. They are less known than consumption charges. Shneyder Solar created this guide to assist you in lowering peak demand charges and also saving money.

These are the top four ways to lower your electric bills.

Check your electricity bill see whether there are any charges for demand.

The peak demand charges could make up between 30 to 70 percent of your monthly electricity bills. These costs can constitute a an enormous portion of your monthly electric bills and should not be ignored. The cost of these charges can be reduced by looking over your bills for utility usage.

The charges do not have the same effect or are the same as consumption charges. They are not calculated in kilowatts, but rather in kW. These charges are easy to spot by looking at things that are only measured in Kilowatts.

It allows you to see the amount of energy your body is being charged in addition to the amount of energy you use at times of peak use.

This simple idea could assist you in identifying patterns in your power consumption during the different months. This can allow you to shift your attention to reducing peak hours. It is a smart idea to have your electricity bills reviewed in order to know how your demand charges are calculated.

Shneyder Solar offers bill auditoring for anyone who partners with it. We will look over your bill and decide if there are any areas in which you’re overcharged.

Our team will help you identify the peak demand charges and decide whether they’re overpriced or legitimate. Our audit can help you to recuperate your funds if you’re paying more than you should for electricity.

It’s as easy as knowing the charges you pay for in your bills for utilities. This will help you save money, and cut down on your monthly expenses.

Utilize technology to reduce your demand charges

Reduce your energy consumption at peak demand each month to lower peak demand fees. You can achieve this by using technology, specifically renewable energy sources.

Renewable energy sources will reduce your monthly bills in a variety of ways. Charges for peak demand can be used to reduce your power consumption each month.

It is viewed as follows: If your electricity comes through renewable energy sources it’s not completely dependent on the national grid. This is due to the fact that you are not consuming electricity from it. This boosts your output, but leads to huge demand fees.

Your business does not use less energy. This is an even better thing for you. Your business is still operating with the power it needs to run, but a portion of that power is utilized to complement the renewable energy technology.

Since it’s not connected to the grid of the nation It won’t show on your utility bill.

You can reduce your charges for consumption by using renewable energy technologies in various ways. Sun-powered energy is the most common and effective method of reducing demand charges.

Commercial systems can be purchased by Shneyder Solar that produce massive amounts of electricity through energy from solar. They are simple to install and will provide immediate benefits once they’re operational.

Renewable energy technology can be expensive. This is the biggest problem for certain companies. You’ll see a substantial return in the course of time. You’ll see a substantial decrease in utility costs because of a decrease in the cost of peak demand.

Solar Panel Houston
Solar Panels Fort Worth

Use energy storage in conjunction with charging EVs to save money

Because renewable energy solutions rely on weather conditions, they can be risky. What happens when it’s cloudy? Is your solar panel going to stop working at its maximum efficiency? This means you’ll need to switch on the grid of the nation, which can increase the power consumption and create these peak cost charges.

If you’re worried that you might be, there shouldn’t be any issue. It’s a simple way to get rid of your concerns and address the issue with energy storage

When you implement energy storage solutions in your company, you can store up to twice as much solar energy in huge battery packs. These batteries can be used to help you when you need to power up more or your system is not adequate to handle them due to weather conditions.

It is still powered by renewable energy. It’s a security net to use when your solar systems are not enough to meet the demands, and you require extra energy without having to rely on the grid system of the national grid.

Be aware of the possibility of electric car (EV) charging too. You can link both as well as the batteries inside your solar panels might be able to meet demand for EV charging stations.. This allows you to electrify transport, which saves energy and doesn’t add to the consumption of electricity. It is not possible to charge EVs using electricity from the grid of the nation. Instead, you are using renewable energy sources to help offset the cost.

Correction using Power Factor

The power factor correction technique is a concept that most people don’t know. It’s a technique that increases the efficiency of your electric energy system.

Power Factor: Power Factor simply means the proportion of reactive energy to real power in an AC circuit. Real power is the amount of electricity actually used up and necessary to support to run an AC circuit’s operation. Reactive power is a form of power that is not utilized but contributes.

The power factor correction process is simply an approach to decrease the power that is reactive and generate power that is useful. Think about how many AC circuits are in your business and how dependent you are on electricity. The more power you use, the greater your reactive capacity.

This will help you to meet your maximum power requirements, which is usually the reason why you’ll see a lot of Kilowatts per month.

Power factor correction is a great way to reduce your company’s electrical consumption. When reactive power charges drop and you’ll see a decrease in the amount of electricity you use. This change won’t affect your business’s operations because you’ll generate all the electricity you need to perform essential tasks.

As with renewable energy sources power factor correction also requires investments. It’s worthwhile for your company.

There is an option for automatic adjustment of power factors. It takes care of all the{ hard|| laborious} work. It could be costly at first, but the savings in the long run will be more than the cost difference.

What are charges for demand? Why are they paid?

It is a scarce item. It is required to be manufactured, transported and consumed simultaneously. Shneyder Solar will balance the requirement for electricity generation and the infrastructure required to offer services to their customers.

Your business will feel reassured knowing that there is enough electricity available at all times. Shneyder Solar makes sure your company has enough power. They must ensure that all customers get electricity.

To meet all customers’ needs, Shneyder Solar will have enough standby equipment like transformers and substations. However, utilities could charge demand-based fees to cover the expense of standing by capacity.

How are demand fees calculated?

Demand charges are usually only charged to industrial, commercial, or agricultural customers. There are however, companies offering residential customers demand fees.

Charges for peak demand and demand are similar to bandwidth you can get from your internet service provider. What capacity and bandwidth can you use to meet your electricity needs?

Shneyder Solar typically calculates your demand by using increments of 15 minutes from your highest monthly consumption. To calculate your fees for peak demand, multiply this amount by a set rate. If you’re a member of a utility company that charges you $10 each month to meet peak demand and your maximum 15-minute increment in energy usage was 75 Kilowatts, you’ll be assessed $750.

Your customer charge and distribution fees may also be subject to charges for peak demand. You may pay significant peak demand charges on your utility bill.

Reduce Peak Demand

There are many ways for the reduction of peak demand fees on your electricity bill. These are the maximum energy consumption you can consume during a specific 15-minute period each month. It will be more expensive for consumption that is peak if you exceed it more than one time.

There are many elements that can be combined so can result in a reduction of peak demand on the cost of electricity. To help subsidize your energy usage through renewable energy technology it is necessary to make a commitment. This decreases the demand on the grid. This means you won’t reach peak levels as often as you did previously.

It is also recommended to use an energy storage solution as an alternative to renewable energy sources in case your current system fails to meet the demands.

It’s as simple as checking your bill for charges due to demand, as we said. This can help you become more aware of when you consume a lot of food and will help you figure out how to cut down on your consumption.

Shneyder Solar is the ideal partner for those who are looking to lower their overall utility bill. We can audit your electric bill to determine whether you’re overcharged.

The service we offer has helped save our customers thousands of dollars and has made sure that they are refunded when necessary. Our audits of bills don’t just aid in resolving errors on future bills but also to ensure that you do not overpay.

Contact our Shneyder Solar team to reduce your commercial electricity bill today.

Contact Shneyder Solar to check your Energy Consumption

Shneyder Solar, a top-rated electricity and natural gas consulting firm, is located at Las Vegas, Shneyder Solar. We are listed as one of the fastest growing companies across the nation. Shneyder Solar continues to expand into new markets across the country.


Fill out the form and our sales consultant will contact you! Once you’ve had your initial consultation, you’ll begin your solar journey.

First name is required

Last name is required

Last name is required

Email is required

Email is required

Phone is required

Please enter a valid property address

Property address is required

Schedule Your Appointment


Some information is missing or is incorrect, please fix the issues above and resubmit.

  I would like to receive promotional offers by calls, text messages, and emails.  

Thank you for your request

Your appointment has been added to our calendar.
The consultation will be online or over the phone. Please prepare a copy of your electric bill or energy usage history for your consultant to give you the most accurate proposal.

Your appointment scheduled on


Your confirmation ID


Skip to content